BLEND: Controls blend of fuzz signal and dry (unaected)
signal. Fuzz signal only when set to 10; dry signal only when
set to 1. Control does not function when Octave stage is
engaged.
TONE: Controls fuzz signal frequency range. More high-fre-
quency presence and brighter tone when set to 10; more
low-frequency presence and darker tone when set to 1. This
control is always functional.
OCTAVE-UP BUTTON: Adds octave-up signal to fuzz signal.
In up (o) position, bypasses octave-up circuit in fuzz signal.
In down (on) position, octave-up circuit is engaged and
button is illuminated. This control is always functional.
SUSTAIN: Controls sustain of fuzz signal. Maximum fuzz
when set to 10; minimum fuzz when set to 1. This control is
always functional.
BYPASS FOOTSWITCH/LED: Pressing this footswitch
bypasses entire eects circuit (true bypass); in eect turning
the unit o. LED illuminates red when eects circuit is engaged;
turns o when eect is bypassed. Note that when bypass is
engaged, the neighboring OCTAVE FOOTSWITCH LED will
remain illuminated to indicate which mode the pedal is in (red
for Original Blender mode; white for Octave Blender mode).
OCTAVE FOOTSWITCH/LED: Bypasses Octave stage and
octave controls. LED illuminates white when Octave stage is
engaged; illuminates red when Octave stage is bypassed.
SAG FOOTSWITCH/LED: Bypasses Sag stage and sag
controls. LED illuminates red when Sag stage is engaged;
turns o when Sag stage is bypassed.
EXPAND FOOTSWITCH/LED: Boosts fuzz volume and adds
more bite and presence by expanding middle and high
frequency range. LED illuminates red when expand circuit is
engaged.
4
To Next Page
Loading...
