Need help?Do you have a question about the Fender Super-Sonic 60 Series and is the answer not in the manual?
General| Power Output | 60 Watts |
|---|---|
| Power Tubes | 2 x 6L6 |
| Effects Loop | Yes |
| Channels | 2 Channels (Vintage and Burn) |
| Reverb | Spring Reverb |
| Footswitch | 4-button Footswitch Included |
| Controls | Volume, Treble, Bass, Reverb, Gain 1, Gain 2, Mid, Master, Presence |
| Speaker | 12" Celestion Vintage 30 |
Read and follow all instructions and warnings for safe use.
Covers safe placement, ventilation, and protection from water and heat sources.
Instructions for qualified personnel, unplugging during storms, and accessory usage.
Covers grounding, power cord care, fire/shock risk reduction, and battery safety.
Adjusts loudness, circuitry voice, and tone character for the Vintage channel.
Switches between channels, adjusts gain, tone, and loudness for the Burn channel.
Controls reverb, indicates power status, and enables FX loop switching.
Provides suggested settings for various tone styles like Rock, Texas Blues, and Heavy.
Controls for powering the amp on/off, standby mode, and fuse protection.
Connects external effects and provides line-level output for recording or expansion.
Direct input for power amp use and connection for remote channel/effect control.
Connects speakers and selects the correct impedance for amplifier and speaker safety.
Details model identification and regional part numbers for ordering.
Specifies power requirements, output levels, and input/output impedance.
Lists fuses, included accessories, speaker, dimensions, and weight.
To Next Page