For more information on how to decrease the vibration, read the CEMA Practical User's Guide on the
whole body vibration in agriculture (www.cema-agri.org).
1.7.3 Electromagnetic emissions
Directive 2014/30/EU
The electrical components installed on the machine can cause electromagnetic emissions. The quantity of
these emissions can change with the component settings.
Directive 2014/30/EU sets a maximum permitted limit for electromagnetic emissions from machines. This
prevents interference or damage to electronic control systems and injury to personnel.
IMPORTANT:
Electrical components used on the machine, but not supplied by AGCO, must have a CE mark and:
• Must not operate with more than the approved maximum power.
• Must not have electromagnetic emissions of more than 24 V/m.
1.7.4 Statutory law
Due to local laws, it may be necessary to install special safety equipment.
Obey the instructions in this manual and operate the machine safely. Install all the guards and safety
devices and make sure that they operate correctly.
Obey all the local laws.
Fire resistance in the cab
All components that are not metal in the operator cab obey ISO 3795 standards.
GUID-0DDE8205-1795-43B9-A598-0E226B309FB1 [V1]
GUID-59244233-0810-4050-B775-263ED2A76E7C [V1]
1. Safety
IDEAL Series Combine 39
ACX2738370
To Next Page
Loading...
Need help?
General
