Do you have a question about the Fenwal PSD-7157 and is the answer not in the manual?
Covers spacing, air velocities, and mounting for open area smoke detection.
Specifies general rules, air velocities, and installation for duct smoke detectors.
Provides essential notes and safety cautions for installation and wiring.
Explains the installation of 2-wire and 4-wire relay modules.
Outlines procedures for GO-NO GO tests and sensitivity metering.
| Power Source | 120VAC |
|---|---|
| Battery Backup | 9V Battery |
| Sensor Type | Photoelectric |
| Alarm Sound Level | 85 dB at 10 feet |
| Interconnect | Yes |
| Dimensions | 2.0" depth |
| Compliance | UL 217 |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | 10% to 90% relative humidity (RH) |