To Next PageTo Next Page
Need help?Do you have a question about the Ferm COMBITOOL CTM1027 and is the answer not in the manual?
General| Power source | Corded Electric |
|---|---|
| Voltage | 230 V |
| Power input | 300 W |
| Weight | 1.5 kg |
| Type | Multi-tool |
| Functions | Cutting, Sanding, Scraping |
| Oscillation angle | 3.2° |
| Included accessories | Sanding pads, Saw blade, Scraper |
Explains symbols indicating risks like electric shock, personal injury, and protective measures.
Covers essential safety rules for operating power tools, including accessory compatibility and speed.
Details intended use and accessory safety, covering accessory attachment and usage.
Details how to maintain grip, avoid snagging, and handle material feeding to prevent kickback.
Provides safety instructions for grinding, cutting-off, and wire brushing operations.
Guidelines for charging, using, and storing battery packs safely.
Outlines the tool's intended applications and lists its technical specifications.
Information on compatible AX-POWER batteries and chargers for the tool.
Step-by-step guide for fitting and removing accessories using the spindle lock and chuck spanner.
Instructions for inserting and removing the battery pack from the AX Adapter.
Steps to start the tool, turn on lights, and adjust speed settings.
Advice on gripping the tool for different tasks and optimizing accessory use.
Instructions on how to clean the tool, avoiding solvents and water immersion.
Specific guidance on cleaning and caring for the soldering tip after use.
