EN
6
tube clockwise. The height of the suspension
bracket is adjustable by loosening the black
knob. After adjusting the suspension bracket
to the correct height, retighten the knob.
• Attach the Combitool to the suspension
bracket of the stand; this suspension bracket
can be turned 360°.
Always check that the maximum rpm of the
accessory is suitable for the maximum speed of
the Combitool.
Fig. 3
When using a grinding stone the first time, use the
dressing stone to balance it. The dressing stone
can also be used for cleaning the surface or to
give the grinding stone a special shape.
Stone, shell -
Steel +
Aluminium, brass + -
Plastic -
Fig. 4
The felt wheels or tip should be screwed on the
mandrel.
Steel +
Aluminium, brass + -
Plastic +
Fig. 5
Wood + +
Steel -
Aluminium, brass + -
Plastic -
Fig. 6
Stone, shell + -
Aluminium, brass + -
Fig. 7
Stone, shell Max
Steel + -
Aluminium, brass + +
Plastic -
Fig. 8
Steel +
Aluminium, brass + -
Plastic -
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Keep the ventilation slots of the machine clean
to prevent overheating of the engine. Regularly
clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does
not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts. Please clean the tool
immediately after use.
Make sure to lubricate the flexible shaft regularly
to prevent excessive heat generation.
To Next Page
Loading...
