To Next PageTo Next Page
Need help?Do you have a question about the Ferm FTB-16 and is the answer not in the manual?
General| Chuck type | Keyed |
|---|---|
| Voltage | 230V |
| No load speed | 0-2800 rpm |
| Drilling capacity in steel | 10mm |
| Cable length | 2 m |
| Power source | Corded Electric |
Essential precautions for user protection, including eyewear, masks, and footwear.
Provides crucial advice on preventing electric shock, including RCD use.
Stresses the importance of clamping or using a vice to secure the workpiece.
Mandates disconnecting the tool before servicing or changing accessories.
Crucial reminder to remove all tools before switching on the machine.
Advises against adapting the drill for purposes other than its intended use.
Instructions for securely mounting the drill on a stable surface.
Caution regarding the drill's weight and the need for assistance during assembly.
Positioning and securing the main drill head onto the column.
Installing the safety guard for the chuck and spindle.
Instructions for securely attaching the drill chuck to the spindle.
Procedure for safely ejecting the drill bit or arbour from the spindle.
Details on correct wiring of the mains plug and cable grip.
Guidance on correct operating procedures, speed, feed, and workpiece handling.
Troubleshooting common issues and immediate actions to take.
Emphasizes professional repair for electrical appliances to ensure user safety.
