Ferm FTB-16/500 User Manual

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0211/10
Ferm Pillar Drill Machine
FTB-16/500
USER’S MANUAL
Art.nr. 733505
Screwfix Art.nr. 34370
UK Subject to change
Document Ref:
FTB-16/500/34370/PMR47/Issue 1/Oct 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Ferm FTB-16/500 Specifications

General

Power	500 W
Drilling capacity in steel	10 mm
Drilling capacity in wood	25 mm
Variable speed	Yes
Reverse function	Yes
Voltage	230 V
Power source	Corded

Summary

Safety Instructions

Personal Safety

Covers protective clothing, footwear, hair covering, and staying alert during operation.

Operational Safety

Details safe practices regarding work area, electric shock, concentration, and tool usage.

Before Using the Pillar Drill

Assembly

Assemble Column, Footplate and Table

Steps to connect the main structural components of the drill.

Fit the Chuck Guard

Instructions for installing the safety guard around the chuck.

Fitting the Drill Chuck

Procedures for securely attaching the drill bit holder to the spindle.

Spindle Speed and Depth Adjustment

Adjusting Drill Spindle Speed

Using the Pillar Drill

Insert Drill into Chuck

How to safely and correctly insert a drill bit into the chuck.

Securing the Workpiece

Methods for firmly holding the material being drilled.

Adjusting the Drill Table

Operating the Pillar Drill

Switching the Drill On/Off

Procedure for starting and stopping the drill using its buttons.

During Use

Key operational guidelines for safe and effective drilling.

Maintenance, Care and Repair

Faults

Electrical Information

Wiring Instructions