To Next PageTo Next Page
Need help?Do you have a question about the Ferm HDM1041P and is the answer not in the manual?
General| Model | HDM1041P |
|---|---|
| Category | Power Tool |
| Type | Hammer Drill |
| Power Source | Corded Electric |
| Voltage | 230V |
| Chuck Size | 13mm |
| No-Load Speed | 0-3000 RPM |
| Impact Rate | 0-48000/min |
Explanation of symbols indicating risks like injury, electric shock, and proper usage.
Essential safety advice tailored for demolition hammer use, including ear protection and auxiliary handles.
Guidelines for safe electrical operation, voltage checks, double insulation, and RCD usage.
Outlines the demolition hammer's applications and key technical data like power, impact, and weight.
References numbered components shown in diagrams on previous pages for user reference.
Presents measured vibration emission levels for main and auxiliary grips as per EN60745.
Step-by-step guide for inserting and removing accessories like chisels using the SDS-max chuck.
Guides for changing the chisel position and adjusting the auxiliary grip for optimal control.
Details on using the On/Off switch and the lock-on button for continuous operation.
Tips for efficient and safe operation, including workpiece clamping and pressure control.
Instructions for cleaning the tool casing and maintaining its condition.
Guidance on inspecting for common defects and reporting operational faults.
