Fermax MDS Digital Guard Unit - Page 62

Pag 18
SECTION E:
Indicates the current time when in standby. When a call is on view, indicates
the time the call was received. This way, if the Concierge is away for a while, they
will know what time the call was made.
IMPORTANT NOTE:
The telephone numbers, panel numbers, block numbers and
guard unit numbers were assigned during installation of the system. Please
contact the maintenance staff for more details.
During the conversation, SECTION D may offer the following information
(in brackets):
* The PANEL-GUARD UNIT communication channel is
selected.
Example: Panel nº 3 with GUARD UNIT nº 1.
* The PANEL-TELEPHONE communication channel is
active.
Example: Panel nº 3 with telephone nº 37.
* The GUARD UNIT-TELEPHONE communication chan-
nel is selected.
Example: GUARD UNIT nº 1 with telephone nº 120.
* The GUARD UNIT-GUARD UNIT communication chan-
nel is selected. Only in installations with more than
one GUARD UNIT.
Example: GUARD UNIT nº 1 with GUARD UNIT nº 4.
* The TELEPHONE-TELEPHONE communication chan-
nel is selected.
Example: Telephone nº 146 with telephone nº 120.
* The PANEL-GUARD UNIT communication channel is
active.
Example: Panel nº 3 from block nº 1 with GUARD UNIT
nº 2.
NOTE: This information is shown in expanded form in zone 7
NOTE: The time is shown in expanded form in zone 5
01/ 04
[ ]
0146/ 0120
[ ]
[ ]
01 03/ 02
03/ 01
[ ]
03/ 0037
[ ]
01/ 0120
[ ]