EasyManua.ls Logo

Fermax Minicentral MDS Digital - Page 23

Fermax Minicentral MDS Digital
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pag 8
Minicentral MDS Digital
Minicentral MDS Digital
SW3. P0. Panel 0 audio activation.
SW1
SW2
SW3
1 2 3 4 5 6 7 81 2 3 4
ON DIP
ON
TD
TPSWITCHERS
P0
OFF
TEST P.
RP
ON
FUSE
FUSIBLE
POWER
0.5A
DECODERS
TEST D.
RD
FXL PC
TX
UNIDAD CENTRAL MDS
MDS CENTRAL UNIT
PANEL 0
MADE IN SPAIN
REF. 2405
RX
12Vdc
RST X Y
FXL
#CENTRALCONFIG
CN11
DIP-SWITCHES 7 and 8 are used to define the central unit network operating mode
parameters.
DIP 7: Nº of digits to be entered to make a call.
ON
512 3 4 768
OFF
ON
512 3 4 768
ON
DIP 8: Access to other central units.
OFF
ON
512 3 4 768
ON
512 3 4 768
ON
6 digits: 2 digits for central unit number + 4 digits for decoder address.
4 digits: Apartment numbers must not be repeated between central
units.
Call to decoders linked to other central units enabled.
Can only call the decoders depending on this central unit.
NOTE:
99
99
9
Remember to deactivate (OFF) when checks are completed.Remember to deactivate (OFF) when checks are completed.
Remember to deactivate (OFF) when checks are completed.Remember to deactivate (OFF) when checks are completed.
Remember to deactivate (OFF) when checks are completed.
P0
OFF ON
Used to check correct audio operation from the decoders, using telephone handset plugged
into TEST connector in decoder.
Fermax Minicentral MDS Digital - Page 23