Fermax Wi-BOX User Manual

1. Connect the connector into the Wi-BOX
Insert the connector;
+ is red
F1 is white

Fermax Wi-BOX Specifications

General

Brand	Fermax
Model	Wi-BOX
Category	Software
Language	English

Summary

Connect Wi-BOX Connector

Identify Connector Wires

Instructions to connect the cable, identifying red as '+' and white as 'F1'.

Terminate Wi-BOX Wiring

Wi-BOX Power Safety Precautions

Warning to avoid shorting cables while power is on to prevent system failure.

Prepare Cabling Pathway

Guidance on creating a cable pathway through the unit if not using the rear.

Wiring Connection Guide

Details on connecting wires (+, L, M, V, Ct, F1) to corresponding terminals.

Re-mount Monitor to Bracket

Monitor Power-Up LED Status

Observation of the LED blinking slowly in red upon power-up after re-connection.

Program VDS Number into Wi-BOX

Initiate VDS Programming Sequence

Press the button once to start the VDS programming process.

Complete VDS Programming

Press door lock release within 10 seconds; LED turns solid green.

Attach Wi-BOX Cover

Locate Wi-BOX QR Code

Indicates the position of the QR code on the Wi-BOX device.

Pair Wi-BOX to Wi-Fi Network

Download and Install FERMAX App

Get the FERMAX Wi-BOX App from the Play Store or App Store.

Execute Wi-BOX Wi-Fi Pairing

Press and hold the button until the LED blinks red, then release.

Confirm Wi-Fi Pairing Success

The LED will turn solid blue upon successful Wi-Fi network pairing.

Activate Call Divert Feature

Initiate Call Divert Activation

Press the button once to turn on the call divert function.

Verify Call Divert Status

The LED will turn solid blue when call divert is active.

Troubleshoot Wi-BOX LED Lights

Resolve Wi-Fi and Pairing Issues

Troubleshooting for no Wi-Fi, pairing router, and server connection problems.

Address Power and VDS Issues

Troubleshooting for no power, unprogrammed VDS, and call divert statuses.