To Next PageTo Next Page
Need help?Do you have a question about the Ferplast swing microchip and is the answer not in the manual?
Ensure cat has standard ISO microchip (15 digits FDXb) for product compatibility.
Avoid liquids near battery area. Check flap function after slams. Ensure battery contacts are clean.
Electronic device may be affected by metal objects; isolate with non-metal material.
Can record up to 32 different microchips (ISO 11784, 15 digits).
Measure cat's belly height, use template to mark, drill holes, cut opening, and fit flap.
Consult glass merchant for cutting glass. Measure pet height, mark, drill, and fit.
Similar to wood, but isolate with non-metal material (min. 50mm thickness) to prevent interference.
Use suitable tools for cutting. Extend tunnel if wall thickness exceeds 55mm.
Position flap, mark screws, drill holes (4.5mm), secure with supplied screws, trim if necessary.
Insert six 1.5V AA LR6 batteries. Allow 10 seconds for system initialization.
Press memory button once, approach cat; code records automatically. Repeat for more chips.
Press and hold memory button for 10 seconds to reset to initial conditions.
Double-press memory button to exclude electronics; single press reactivates.
Clean flap and infrared detectors with a soft, dry cloth. No special maintenance needed.
General| Brand | Ferplast |
|---|---|
| Model | swing microchip |
| Category | Pet Care Product |
| Language | English |
