EasyManua.ls Logo

FERREX 704518 - Pack Contents; Parts

FERREX 704518
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Congratulations on the purchase of your FERREX® 900W Planer. When you open
your packaging, rst remove all items and check there are no parts damaged or
missing. If you nd anything wrong, do not operate the product until the parts
have been replaced or the fault has been rectied. Failure to do so could result in
serious personal injury.
Application
First time users or inexperienced operators pay particular attention to the
operation of the 900W Planer, including details of starting and stopping and
correct use of the 900W Planer on pages 13-15, as well as the maintenance
instructions on pages 16-20.
Intended use of the 900W Planer
It is exclusively intended for home use. It is not designed for trade or commercial
use.
This 900W Planer can be used for planing of rmly supported wooden materials,
such as beams and boards. It is also suitable for beveling edges and rebating.
Any other use or change to the appliance is deemed improper and poses a
signicant risk of accidents.
Contents of carton
1 x 900W Planer
1 x Parallel guide (not tted)
1 x Rebate guide (not tted)
1 x Dust bag
1 x 8mm Wrench
1 x 2.5mm Hex key
1 x Instruction Manual
1 x Warranty Card & details
Pack contents / parts
2