parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations dierent from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualied repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
6) Recommendation
a) Recommendation that the tool always be used with a residual current
device having a rated residual current of 30 mA or less.
Additional safety instructions for your paint sprayer
1. Beware of high pressure at the nozzle and toxic sprays, it can cause
severe skin damage. Never allow any part of the body to come in
contact with the spray.
2. Recommendation that the tool always be supplied via a residual current
device with a rated residual current of 30mA or less.
3. Do not use guns for spraying ammable materials.
4. Do not clean guns with ammable solvents.
5. Warning! Be aware of any hazard presented by the material being
sprayed and consult the markings on the Paint pot or the information
supplied by the manufacturer of the material to be sprayed.
6. Do not spray any material where the hazard is not known.
7. Use appropriate personal protective equipment, such as dust mask,
protective clothing.
6
To Next Page
Loading...
