What to do if my FERREX FAB 20-Ib Drill cannot be switched on?
If your FERREX Drill won't switch on, there are a few potential causes. First, the battery may not have enough power, so try recharging it. Second, ensure the battery is fully inserted into the holder until it locks. Lastly, check that the right-handed/left-handed rotation selector is pushed all the way to the right or left, not in the middle position.
Defines the intended use and prohibits misuse of the drill.
Outlines potential hazards that may remain even with proper use.
Provides critical safety warnings and guidelines for all power tool operations.
Safety measures related to the environment where the power tool is used.
Guidelines to prevent electrical hazards during power tool use.
Focuses on user's personal conduct and protective measures for safe operation.
Instructions on how to use and maintain the power tool safely and effectively.
Specific guidance for the safe use and maintenance of the cordless battery.
Detailed steps and settings for performing screwing and drilling tasks.
To Next Page
General