1
IINNIITTIIAALL IINNSSTTAALLLLAATTIIOONN && AASSSSEEMMBBLLYY
6611”” TTRRIIPPLLEE BBAAGG CCOOLLLLEECCTTIIOONN SSYYSSTTEEMM
BBLLOOWWEERR MMOOUUNNTT && DDRRIIVVEE GGRROOUUPP
Remove Discharge Chute................................10
Release Mower Drive Belt Tension..................10
Remove Guard & Spindle Pulley .....................10
Install Spindle Pulley........................................11
Install Guard & Blower Mount..........................11
Blower Preparation ..........................................12
Install Blower & Belt Guard..............................15
OOPPEERRAATTIINNGG WWIITTHHOOUUTT BBLLOOWWEERR
Reattaching Discharge Chute..........................16
RREEFFEERREENNCCEE IINNFFOORRMMAATTIIOONN::
Torque Specification Chart .....Inside Back Cover
NOTE: In these instructions, “left” and “right” are
referred to as seen from the operating position.
© Copyright 2001 Ferris Industries, Inc.
All Rights Reserved. Printed in USA.
TP 100-7040-01-AT-FD
SSAAFFEETTYY RRUULLEESS && IINNFFOORRMMAATTIIOONN
General Warnings..............................................2
Safety Decals.....................................................2
GGEENNEERRAALL OOPPEERRAATTIINNGG IINNSSTTRRUUCCTTIIOONNSS
Mowing with the Double / Triple Catcher...........3
After Operation ..................................................3
Storing the Grass Catcher.................................3
Mowing Without the Blower ...............................3
IINNIITTIIAALL IINNSSTTAALLLLAATTIIOONN && AASSSSEEMMBBLLYY
4488”” && 5522”” DDOOUUBBLLEE BBAAGG CCOOLLLLEECCTTIIOONN SSYYSSTTEEMM
BBLLOOWWEERR MMOOUUNNTT && DDRRIIVVEE GGRROOUUPP
Remove Discharge Chute..................................4
Release Mower Drive Belt Tension....................4
Remove Guard & Spindle Pulley .......................4
Install Spindle Pulley..........................................5
Install Guard ......................................................5
Mower Deck Preparation ...................................5
Blower Preparation ............................................7
Install Blower & Belt Guard................................9
Table of Contents
Model Description Name
Unit MODEL Number
PRODUCT REFERENCE DATA
Unit SERIAL Number
Dealer Name
Date Purchased
To Next Page
Loading...
Need help?
General