24 ferrismowers.com
Not all greases are compatible. Red grease (p/n 5022285)
is recommended, automotive-type high-temperature, lithium
grease may be used when this is not available.
Oil:
• Discharge chute pivots (B, Figure23).
• Ground speed control lever and neutral linkage rod pivots
(A, Figure25).
• Seat plate pivots (B, Figure24).
• Deck lift linkage pivots (C, Figure24).
Generally, all moving metal parts should be oil where contact
is made with other parts.
Keep oil and grease off of belts and pulleys. Remember to
wipe grease fittings and surfaces clean both before and after
lubrication.
23
24
25