Install Weight Carrier
1. Install the weight carrier (A, Figure 54) onto the
front of the unit and secure with the 3/8-16 x 1-
1/4" bolts (C), 3/8" washers (B) and 3/8-16" nylock
flange nuts (G).
NOTE: Use top holes in the weight carrier for the
/S2OOOZSeries (as shown in Figure 54).
2. Install the counter weights (D) in the weight carrier
and secure with the retaining pin (E) and hairpin
clips (F).
/
//
Figure 54. Install Weight Carrier
A. Weight Carrier
B. 3/8" SAE Washer
C. 3/8-16X1-1/4" Bolt
D. Weight
E. Retaining Pin
F. Hairpin Clip
G. 3/8-16 Nylock Flange Hut
33
To Next Page
