3
Thank you for purchasing this quality-built Ferris Zero-
Turn Stand-On Mower. We’re pleased that you’ve placed
your confidence in the Ferris brand. When operated and
maintained according to the manuals, your Ferris product will
provide many years of dependable service.
The manuals contain safety information to make you aware
of the hazards and risks associated with the unit and how to
avoid them. This Zero-Turn Stand-On Mower was designed to
be used as described in this operator's manual and operated
by trained professionals for finish cutting of established lawns
and is not intended for any other purpose. It is important that
you read and understand the instructions thoroughly before
attempting to start or operate this equipment. Save these
original instructions for future reference.
Products Covered by This
Manual
The following products are covered by this manual:
5901852, 5901853, 5901854, 5901873, 5901947, 5901948,
5901949, 5902050, 5902037 & 5902070
The images in this document are representative, and
are meant to complement the instructional copy they
accompany. Your unit may vary from the images
displayed.LEFTandRIGHTare as seen from the operator's
position.
Ferris is a registered trademark of Briggs & Stratton.
Identification Tag Location
The product identification tag (A, Figure 1) can be found on
the left frame rail of the unit.
1
Your unit may feature a serial tag that looks like either one of
the following two options:
PRODUCT REFERENCE DATA
Unit Model Number:
Unit Serial Number:
Mower Deck Model Number:
(if applicable)
Mower Deck Serial Number: (if
applicable)
Dealer Name:
Date Purchased:
ENGINE REFERENCE DATA
Engine Make:
Engine Model:
Engine Type/Spec:
Engine Code/Serial Number
When contacting your authorized service dealer for
replacement parts, service, or information you MUST have
these numbers.
Note:For the location of the engine identification numbers,
refer to engine owner's manual.
The Illustrated Parts List for this machine can be downloaded
from ferrismowers.com. Please provide model and serial
number when ordering replacement parts.
Operator Safety
Safety Alert Symbol and Signal Words
The safety alert symbol identifies safety information
about hazards that can result in personal injury. A signal word
(DANGER, WARNING, or CAUTION) is used with the alert
symbol to indicate the likelihood and the potential severity of
injury. In addition, a hazard symbol may be used to represent
the type of hazard.
To Next Page
Loading...
Need help?
General
