Need help?Do you have a question about the Ferroli ECONCEPT 35 C and is the answer not in the manual?
Provides an overview and welcome message for the boiler.
Explains the layout and functions of the boiler's control panel.
Details the procedure for switching the boiler on and off, including safety notes.
Covers various settings for boiler operation and comfort.
Allows selection between heating and hot water or hot water only modes.
Enables choice between energy-saving ECO mode and standard Comfort mode.
Allows adjustment of the system's heating water temperature from 20°C to 90°C.
Enables setting the desired domestic hot water temperature.
Enables setting room temperature via an optional thermostat.
Enables setting room temperature via an optional remote timer.
Adjusts heating output based on external temperature for optimal comfort and savings.
Allows adjustment of the heating curve to optimize performance based on room temperature.
Details how to check and adjust the system water pressure for proper operation.
Outlines essential qualifications and rules for boiler installation.
Details requirements for the boiler's installation location and mounting.
Describes how to connect the boiler to the heating system and water supply.
Provides instructions and safety precautions for connecting the gas supply.
Details the procedures for connecting the boiler to the electrical power grid.
Details how to connect and position the optional external temperature sensor.
Provides instructions for accessing the boiler's electrical connection terminal board.
Explains the requirements and installation of flue systems for exhaust.
Explains the connection and accessories for coaxial flue systems.
Details the connection and accessories for separate flue pipes.
Describes requirements for connecting the boiler to collective flue systems.
Guides on how to connect the condensate drain system.
Covers gas conversion and other operational adjustments.
Lists essential checks and procedures for boiler start-up.
Lists essential checks before initial boiler ignition and after maintenance.
Lists essential checks to perform while the boiler is operating.
Details the procedures for periodical checks and maintenance tasks.
Outlines the annual maintenance tasks to ensure proper boiler function.
Instructions on how to safely open the boiler's outer casing for access.
Procedure for performing and interpreting combustion analysis for optimal efficiency.
Provides guidance on diagnosing and resolving common boiler faults.
Explains how fault codes are displayed and how to interpret them.
A comprehensive table detailing fault codes, possible causes, and solutions.
Presents the physical dimensions and connection points of the boiler.
Shows an overview of the boiler and identifies its key components.
Illustrates the internal hydraulic layout of the boiler system.
Lists detailed technical specifications and performance data of the boiler.
Includes diagrams related to pump performance and pressure.
Provides the electrical schematic for the boiler's internal wiring.
To Next Page
General