To Next PageTo Next PageWhat to do if water leaks from the base of my Ferroli Air Conditioner interior unit?
If water is leaking from the base of your Ferroli Air Conditioner's interior unit, it's likely due to condensation spilling from the tray. Ensure the unit is perfectly level or slightly tilted to the right (maximum 1 cm). Also, check that the condensation pipe isn't clogged and has a sufficient slope to allow drainage.
Why does my Ferroli GOLD INVERTER compressor operate for short periods?
If your Ferroli Air Conditioner compressor operates for short periods and then stops, it could be due to the machine being partially discharged or the heat exchanger of the exterior unit being dirty or clogged. It is advised to contact the Service Center. Ensure that you clean the heat exchanger.
What to do if my Ferroli Air Conditioner operates but does not cool?
If your Ferroli Air Conditioner operates but does not cool, it could be due to insufficient coolant in the machine or a broken valve solenoid. In this case, it is advised to contact the Service Center.
Why is the interior unit of my Ferroli GOLD INVERTER operating while the exterior unit is off?
If the interior unit of your Ferroli Air Conditioner is operating while the exterior unit remains off, it indicates that the exterior unit is not powered. In this case, it is advised to contact the Service Center.
General| Type | Split Air Conditioner |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 9 kg |
| Power Supply | 220-240V/50Hz |
| Noise Level (Outdoor Unit) | 50 dB(A) |
Procedures for receiving the unit and initial remarks on its design.
Description of the wall unit type and declaration of compliance with directives.
Explanation of the remote control buttons and their operations.
Interpretation of the icons shown on the air conditioner's LCD.
Guidelines for correct and effective remote control operation.
Step-by-step guide for inserting and changing batteries.
Instructions on how to turn the air conditioner on.
How to choose between Auto, Cool, Dry, Fan, and Heat modes.
Details on Blow, Turbo, Sleep modes, and Lock function.
A table listing error codes and their corresponding malfunctions and actions.
Explanation of how the unit automatically selects operating modes based on temperature.
How to adjust the direction and movement of the air flow.
Setting the current time and programming on/off timers.
Description of the meaning of various LED lights on the indoor unit.
Function of the emergency button and automatic restart after power loss.
Procedures for properly turning off and preparing the unit for long periods.
Step-by-step guide for cleaning the air filters of the wall unit.
Instructions for cleaning the interior part of the air conditioner.
Guidance on cleaning the exterior component of the air conditioner.
Considerations for user and environmental safety during operation.
Information on where to get technical support and replacement parts.
Solutions for common operational issues not shown as error codes.
Critical safety regulations for installation and daily use.
