Why Ferroli Air Conditioner fails to produce cold?
Your Ferroli Air Conditioner might not be producing cold air because there is no cold water. In this case, you should check the coolant. Alternatively, the control panel might have the wrong settings; if so, change the settings on the control panel.
Why Ferroli Air Conditioner fails to produce heat?
If your Ferroli Air Conditioner isn't producing heat, it could be due to a couple of reasons. First, there might be no hot water, so check the boiler. Second, the control panel might have the wrong settings; if so, change the setting on the control panel.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Type | Wall-mounted split system |
| Cooling Capacity | 9000 BTU/h |
| Heating Capacity | 9000 BTU/h |
| Energy Efficiency Ratio (EER) | Varies by model, typically around 3.2 |
| Power Consumption (Cooling) | 800W |
| Noise Level (Outdoor Unit) | 50 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
Critical safety instructions and warnings for installation personnel.
Best practices for ensuring proper unit installation and drainage.
Guidance on selecting an appropriate location for unit installation.
Step-by-step instructions for the physical installation of the unit.
Wiring details and diagrams for units without remote control.
Wiring diagrams for heat/cool function and speed selection.
Wiring for ambient thermostat with heat/cool and speed control.
Wiring for economy/thermostat with heat/cool and speed control.
Wiring instructions for the six-speed VN motor.
Guide to identifying and resolving common faults and issues.
To Next Page
