Need help?Do you have a question about the Ferroli GS 20 IE TG (I) and is the answer not in the manual?
General| Type | Instantaneous Gas Water Heater |
|---|---|
| Model | GS 20 IE TG (I) |
| Fuel Type | Gas |
| Ignition | Electronic |
| Gas Type | Natural Gas / LPG |
| Installation | Wall Mounted |
| Minimum Water Flow Rate | 2.5 liters/minute |
| Water Pressure | 0.1 - 10 bar |
| Safety Features | Flame Failure Device, Overheat Protection |
Illustrates the external components and layout of the outdoor gas water heater model.
Illustrates the external components and layout of the indoor gas water heater model.
Explains safety measures during power fluctuations or failures.
Describes the mechanism to cut off gas supply if the flame extinguishes.
Step-by-step guide on how to prepare and use the water heater for the initial operation.
Explains the procedure to power up and start the water heater operation.
Details how to adjust the hot water temperature, considering multiple remote controllers.
Instructs on actions to take for gas odor, burning sound, or water leakage.
Warns against unauthorized opening of the unit due to electric shock risk.
Explains how the LED display shows fault codes and provides solutions for identified errors.
Details technical specifications for different models, including gas type, heat load, and capacity.
To Next Page