Need help?Do you have a question about the Ferroli RXA 14.1 and is the answer not in the manual?
Provides essential guidance for unit installation, use, and maintenance.
States the unit's compliance with applicable European Directives.
Explains the information presented on the unit's identification plate.
Details the unit's purpose, application, and key components.
Explains the structure and meaning of the unit's model code.
Details the function and construction of major unit parts.
Describes the microprocessor controller and user interface functions.
Outlines the different available unit configurations (VB, VP, VA).
Lists and describes available optional modules and features.
Details optional accessories that enhance unit functionality.
Presents comprehensive technical specifications and performance metrics.
Lists nominal cooling and heating performance data for standard installations.
Provides EUROVENT certified performance data for standard plant configurations.
Lists nominal cooling and heating performance data for radiant plant applications.
Presents graphical data showing cooling performance under various conditions.
Presents graphical data showing heating performance under various conditions.
Details hydraulic performance, including pressure drops for different configurations.
Defines the operational boundaries for cooling and heating modes.
Lists electrical specifications, including current, power, and protection details.
Provides sound power and sound pressure level data by octave bands.
Details component, transport, and operating weights for various configurations.
Shows dimensional drawings and specific measurements of the unit.
Specifies the required clearance around the unit for proper operation and maintenance.
Explains the procedures and requirements for connecting the hydraulic system.
Details the process for making electrical connections, including power supply and user terminals.
Guides the user on how to check and handle the unit upon delivery.
Provides instructions and considerations for correctly placing the unit.
Outlines the essential checks and procedures before and after unit activation.
Overview of the microprocessor controller, interface, and remote control capabilities.
Details the navigation and organization of the unit's control menus.
Lists and explains the unit's analogue and digital inputs and outputs.
Specifies the technical parameters and operating conditions of the controller.
Explains alarm activation, reset mechanisms, and memory management.
Provides a detailed list of alarm codes, descriptions, and affected loads.
Describes user-configurable functions like operating modes, set points, and heaters.
Covers Modbus protocol, settings, and device addressing for serial communication.
Details the NTC temperature probes and their resistance-temperature data.
Provides essential guidance for routine cleaning and maintenance operations.
Highlights safety precautions for accessing and operating the unit.
Contains critical information on refrigerant hazards, first aid, and spill measures.
To Next Page
General