To Next PageTo Next PageWhat to do if the supply voltage is under 170V in my Ferroli Burner?
If the supply voltage to your Ferroli Burner is under 170V, this indicates trouble with the electric mains. Check the electrical system to resolve this issue.
Introduction to the FERROLI SUN P N pellet burner, highlighting its features and design.
Diagram of the control panel and explanation of operation status indications.
Details the process for powering the burner on and off, including diagrams.
Instructions on how to start and stop the burner, including display indicators.
Guide to accessing and modifying user settings for temperature, modes, and power.
How to access the Service Menu and navigate through transparent, information, and history parameters.
Final guidance on automatic operation, fuel supply, and room conditions for the burner.
General guidelines for product usage, modifications, and the requirement for qualified personnel.
Requirements for the installation room, including ventilation, environmental conditions, and safety devices.
Specific instructions for installing the burner in SFL boilers, including fixing components and connecting cables.
Guidelines for electrical connections, fuel type, and pellet loading procedures.
Instructions for connecting to an external DHW tank using a circulating pump or diverter valve.
Checks to perform before initial burner lighting or after maintenance.
Procedures for burner setting, calibration, and periodic checks.
Instructions on how to open the burner casing and disassemble its components for inspection.
Guide to the self-diagnosis system and a list of faults with their causes and cures.
Dimensional drawings for SUN P7 N and SUN P12 N models.
Diagram showing main components of the burner with a legend.
Table listing technical specifications and identification codes for the burner models.
Detailed electrical wiring diagram for the burner, showing connections to various components.
General
