Ferve F-814 - User Manual

F-814
BATTERY AND ALTERNATOR TESTER
COMPROBADOR DE BATERÍA Y ALTERNADOR
250A
12 V
12 V
32 Ah 180 Ah
250 x 145 x 210 mm
3,350 kg
TESTTEST
TESTTEST
D

Summary

FERVE F-814 Battery and Alternator Tester

Precautions and Warnings

Product Overview and Features

Battery Charge Level Testing

Connecting the Supply Clips

Connect positive (red) and negative (black) clips to battery terminals.

Reading the Digital Voltmeter

Consult the digital voltmeter for the battery voltage reading.

Battery Testing: Correct or Faulty

Comparing Readings with Charge Table

Compare the observed battery voltage with the values in the charge table.

Battery Charging Procedure

Discharge Test Procedure

Connecting the 250 A Clip

Connect the 250A clip to one terminal of the battery.

Performing the Discharge Test

Press pushbutton-tip on the other terminal until green indicator goes out.

Interpreting Battery Test Results

Temperature Indicator Warning

Alternator Testing

Connecting Clips for Alternator Test

Connect supply clips to the positive and negative battery terminals.

Starting the Engine

Start the engine and run it at 2000 RPM.

Alternator Test Result Interpretation

Warranty Information

Manufacturer Contact Information

Ferve F-814 Specifications

General

Brand	Ferve
Model	F-814
Category	Test Equipment
Language	English