Ferve F-925 - User Manual

!"#$% RF
!"#&'
!"#&' RF
!"#$%
!"#$(
1
2

Summary

Precautions

Read the instruction manual before using the charger

Emphasizes reading the manual before operating the charger.

Attention! Explosive gas

Warning about the presence of explosive gas during operation.

Avoid flames and sparks

Instruction to prevent open flames and sparks near the device.

Do not expose the equipment to rain

Warning against exposing the charger to moisture or rain.

Use it in a well-ventilated place

Recommendation to operate the device in a space with good air circulation.

Disconnect the mains cable (1) before connecting or disconnecting the clamps (2)

Procedure for safely disconnecting the power before attaching/detaching clamps.

For lead-acid batteries only

Specifies that the charger is designed exclusively for lead-acid batteries.

Do not use it to charge battery cells

Prohibits using the charger for charging small battery cells.

Battery acid is corrosive

Alerts users to the corrosive nature of battery acid.

Bear in mind the instructions provided by the battery manufacturer

Advises following guidelines from the battery manufacturer.

The wire to the mains can only be replaced at a specialized workshop

States that the power cord replacement must be done by qualified technicians.

Bear in mind the instructions provided by the vehicle manufacturer

Advises following guidelines from the vehicle manufacturer.

RF Ripple Free Technology

Checking Polarity

Testing Battery Condition (Stopped Engine)

Checking Alternator Function (Starter Engine)

Normal Battery Charging Process

Fast Battery Charging Process

Booster; Starting Assistance

Declaration of Conformity

Warranty Information

Ferve F-925 Specifications

General

Brand	Ferve
Model	F-925
Category	Battery Charger
Language	English