Festo CMMT-ST-C8-1C-...-S0 Series Instructions

Translation of the original instructions
BISS
®
, EtherCAT
®
, EtherNet/IP
®
, PI PROFIBUS PROFINET
®
, PHOENIX CONTACT
®
are registered trademarks of the respective trademark owners in certain coun
tries.
1 About this document
1.1 Target group
The document is targeted towards individuals who mount and operate the
product. It is additionally targeted towards individuals who are entrusted with the
planning and application of the product in a safetyrelated system (safety manual
in accordance with EN61508).
1.2 Applicable documents
All available documents for the product èwww.festo.com/pk.
The user documentation for the product also includes the following documents:
Designation Contents
Product instruction manual Installation, safety subfunction
Detailed description of assembly, installationProduct descriptions
Detailed description of safety subfunction
Description/online help plugin Plugin:
– Functions and operation of the software
– Initial commissioning assistant
Firmware functions:
– Configuration and parameterisation
– Operating modes and operational functions
– Diagnostics and optimisation
Bus protocol/control:
– Device profile
– Controller and parameterisation
Festo Automation Suite online
help
– Function of the Festo Automation Suite
– Management and integration of devicespecific plugins
Tab. 1 User documentation for the product
1.3 Product variants
The product is available in 3 fieldbus variants. The following order code indicates
the equipment features of the product variant.
Feature Order code Type
Servo drive CMMT Servo drive, seriesT
Motor type ST Stepper motor or EC motor
Nominal current C8 8A
Nominal input voltage 1C 24…48VDC
EC EtherCAT
EP EtherNet/IP
Bus protocol/activation
PN PROFINET
Safety function S0 Basic safety
Tab. 2 Product variants CMMTST... (e.g.CMMTSTC81CECS0)
This documentation refers to the following version:
– Servo drive CMMTST...S0, revision1 and higher, see product labelling.
This is the first available revision.
• For later revisions of the product, check whether updated documentation is
available èwww.festo.com/pk.
1.4 Product labelling
• Observe the specifications on the product.
The product labelling is located on the right side of the device. The product
labelling enables identification of the product and shows the following informa
tion:
Product labelling (example) Meaning
CMMTSTC81CECS0 Order code
8084005 MMYYYY:XX  Rev01 Part number, serial number (manufacturing
month, manufacturing year, plant number), revi
sion
Main Input: 24…48VDC8A Technical data for the power supply (PELV fixed
power supply)
Motor Out: 0…Input VAC8A
RMS
300W Technical data for the motor output (output
voltage, nominal current, nominal output power)
T
AMB
: max. 50°C Ambient temperature (T
AMB
)
IP20 Degree of protection
MACID: XF1 IN XXXXXXXXXXXX First MAC address of the device for RTE commu
nication XF1IN, also represented as a barcode
RRFTOKC20181092 KC mark certificate (test mark for Korea)
01/205/5696.00/19 TÜV certificate number
Data matrix code, 123456789AB Product key as a data matrix code and an
11character alphanumeric code
Festo AG&Co.KG Manufacturer
DE73734 Esslingen Manufacturer’s address
Made in Germany Manufactured in Germany
Tab. 3 Product labelling (example)
Warning symbol on the front of the product
The following warning symbol can be seen on the front of the product:
1
Attention! Hot surface
Fig. 1 Warning symbol on the front of the product (example CMMTST…EC)
General meaning Meaning for the CMMT-ST
Attention! Hot surface Metallic housing parts of the device can reach high temperatures
during operation.
Tab. 4 Meaning of the warning symbol
1.5 Specified standards
Version
ENISO138491:2015 EN618002:2015
ENISO14118:201802 EN6180051:2007+A1:2017
EN602041:201809 EN6180052:2017
EN60715:201711 EN62061:2005+AC:2010+A1:2013+A2:2015
EN61508 Parts 17:2010 –
Tab. 5 Standards specified in the document
2 Safety
2.1 Safety instructions
General safety instructions
– Assembly and installation should only be carried out by qualified personnel.
– Only use the product if it is in perfect technical condition.
– Only use the product in original status without unauthorised modifications.
– Do not carry out repairs on the product. If defective, replace the product
immediately.
– Observe labelling on the product.
– Take into consideration the ambient conditions at the location of use.
The safety function might fail, and malfunctions might occur if you do not
comply with the parameters required for the ambient and connection condi
tions.
– Never remove or insert a plug when the power is switched on.
8097145
CMMT-ST-C8-1C-...-S0
Servo drive
8097145
201901
[8097147]
Instructions| Installation, Safety subfunction
Festo AG & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 3470
www.festo.com

Festo CMMT-ST-C8-1C-...-S0 Series Specifications

General

Brand	Festo
Model	CMMT-ST-C8-1C-...-S0 Series
Category	Servo Drives
Language	English