Radar Training System, LabVolt Series
23 © Festo Didactic
Specifications
Parameter Value
Power Requirements
Service Installation Standard single-phase ac outlet
Voltage 100-240 V ac
Current 2.5 A
Frequency 50/60 Hz
Rating of DC Power Outputs
+5 V 2 A
+3.3 V 2.5 A
+12 V - A 1.25 A
+12 V - B 1.25 A
-12 V 0.85 A
-5 V 1 A
Physical Characteristics
Dimensions (H x W x D) 165 x 250 x 250 mm (6.5 x 9.8 x 9.8 in)
Net Weight 5.6 kg (12.2 lb)
Reconfigurable Training Module (RTM)
8094635 (9431-30)
The Reconfigurable Training Module (RTM) consists mainly of a powerful digital signal processor (DSP), with
three slots on the module front panel for installing interface modules. An Ethernet port (RJ-45) connector,
located on the back panel, allows connection of the RTM to the host computer. The functionality of the training
system is determined by downloading a program into the DSP memory using the host computer that runs the
Front View
Rear View
To Next Page
Loading...