Festool CT 26 E HEPA - Safety instructions

Mobile dust extractor CT 26 E, CT 36 E
CT 36 E, CT 36 LE 14,4 kg
CT 48 E 18,8 kg
4 Safety instructions
Warning! Read and observe all informa
tion and safety instructions. Ignoring warning
notes and instructions may lead to electric
shocks, fires and/or cause serious injury.
Keep all safety information and other instruc
tions in a safe place for future reference.
– This device can be used by persons with re
duced physical, sensory or mental abilities
or those who lack experience or knowl
edge, if they are supervised or have been
instructed on safe use of the device and un
derstand the resulting dangers. Children
should always be supervised to ensure that
they do not play with the machine.
– Warning: machine may contain hazardous
dust. Only authorised qualified specialists
with suitable protective equipment may
perform maintenance, empty the container
and change the filter.
– Always operate with the filter system in
stalled!
– Always use suitable protective equipment!
– If intact following a visual inspection, work
in a dry environment according to instruc
tions!
– Risk of explosion and fire hazard: do not
extract sparks or hot dust, flammable or
explosive dust (e.g. magnesium, alumini
um, petrol, thinner, with the exception of
wood), aggressive fluids/solids (e.g. acid,
leach, solvent).
– Observe all national safety regulations as
well as the material manufacturer's speci
fications!
– Always use the socket on the machine for
the purpose specified!
– Do not lift or transport using a crane hook
or lifting gear!
5 Functional description
[1-1]
Intake opening
[1-2]
Module slot
[1-3]
Appliance socket
[1-4]
Electrical outlet module circuit
breaker
[1-5]
Hose store
[1-6]
Handle
[1-7]
SysDoc
[1-8]
Switch
[1-9]
Suction power adjuster
[1-10]
Locking clip
[1-11]
Dust container
[1-12]
Brake
[1-13]
Lever
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
► The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
6.1 Initial operation
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the accessories from the dust con
tainer [2-3] and the packaging!
► Insert a filter bag in the dust container (see
chapter
9.1 ).
► Replace the top section [2-1] and close the
locking clips [2-2].
► Attach the cable holder to the rear of the
mobile dust extractor (see Fig. [3]).
► Connect the suction hose to the machine.
6.2 Switch on/off
► Insert the plug into an earthed socket.
English
7