12
Hardness of the sanding pad
Adapted to the surface being processed, the ma-
chine can be equipped with sanding pads of differ-
ent hardnesses.
Soft:
Universal for coarse and fine sanding, for flat
and convex surfaces.
Extra-soft:
Fine sanding of moulded parts, arches,
radii. Do not use on edges.
Attaching sanding accessories using Stick-
Fix [4]
The suitable StickFix sandpaper and StickFix sand-
ing cloth can be attached quickly and simply to the
StickFix sanding pad.
Press the self-adhesive sanding accessory onto
the sanding pad
[1-5]
.
In the case of a weakening adhesive effect of
the StickFix surface, the sanding pad acces-
sories, in particular those which are not yet touching
the workpiece,
may come loose from the sanding
pad and cause injuries
. Replace the sanding pad!
Dust extraction
Integral dust extractor with long-life dust bag
As standard, the sanders are equipped with an inte-
gral dust extractor. The sanding dust is extracted
through extraction openings in the sanding pad and
is collected in the dust bag.
Installing the dust bag [5]
Slide the dust bag adapter onto the extractor
connection piece.
Slide the dust bag onto the adapter until it clicks
into place.
To Next Page
Loading...
