13
through invoice or delivery note). Damage caused
by, in particular, natural wear, overloading, incor-
rect handling, or damage caused by the operator,
or damage caused through use of the equipment
contrary that specifi ed in the Operating Instruc-
tions, or damage which was known at the time
of purchase, is not covered by the warranty.
Furthermore, damage caused by the use of non-
original accessories and consumable materials
(e.g. sanding pads) is also excluded. Complaints
can only be recognised if the tool is returned while
still assembled to the supplier or an authorised
Festool Customer Service workshop. Keep the
Operating Instructions, Safety Instructions, Spare
Parts List and purchase receipt in a safe place.
Otherwise the respective, current warranty condi-
tions of the manufacturer shall apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to the
technical content of this documentation.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As “downstream users”
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
To Previous Page
Loading...
