To Next PageTo Next Page
Need help?Do you have a question about the Festool LEX 2 150/3 and is the answer not in the manual?
General| Sanding Stroke | 3 mm |
|---|---|
| Pad Diameter | 150 mm |
| Weight | 1.0 kg |
| Air Consumption | 290 L/min |
| Operating Pressure | 6 bar |
| Dust Extraction Connection Diameter | 27 mm |
| Power Source | Pneumatic |
General safety guidelines for operating the pneumatic tool, covering workplace and surroundings.
Instruction to retain the manual and safety information for future reference and machine transfer.
Specific safety advice for machine operation, including air pressure, accessories, and environmental factors.
Identification of potential hazards that may persist even after adhering to all safety measures.
Detailed specifications including sanding pad diameter, drive type, operating pressure, speed, and air consumption.
Explanation of symbols used in the manual, such as general danger warnings and instruction notes.
Defines the intended applications for the machines and materials that must not be processed.
Overview of the tool's features and how they function, including connection and start-up procedures.
Details on the IAS 2 hose connector system combining compressed air, exhaust, and dust extraction.
Instructions on how to start the tool, adjust speed, and configure settings for optimal performance.
Information on dust extraction setup, suction units, and selection/assembly of sanding pads.
Guidance on applying abrasives and performing regular maintenance on tool components like vanes and brakes.
Procedures for lubricating the tool and replacing the silencer to maintain pneumatic power.
Instructions for cleaning extraction channels and guidance on using original Festool accessories and tools.
Details on the 1+2 extended warranty and the Festool Limited Warranty terms and conditions.
