2/3
116/03
B
Tools/accessories
You require the HL 850 EB for rebating. All accessories are included in the
scope of delivery.
Basic equipment:
Denomination Order no.
Electric planer HL 850 EB GB 240V 574541
The use of a dust extractor is highly recommended. The extractor connector
can be fitted on the left or right of the device as required. The connection
diameter is 36 mm.
116/04
116/02
C
Preparation/set-up
Install the rebate depth and parallel stop. (see operating instructions) •
Setting the parallel stop to the desired rebate width. •
Set the desired rebate depth. To do this, measure the exact distance •
from the planer foot to the rebate depth stop. Place the machine on its
side such that the rebate depth stop faces upwards.
116/05
Chamfering using „V“ grove in forward soleplate.
To Next Page
Loading...
