Festool MFT 800 User Manual

1
MFT 800
MFT 1080
Instruction manual
IMPORTANT: Read and understand all
instructions before using.
Multifunction table
Guide dutilisation
IMPORTANT: Lire et comprendre toutes
les instructions avant de démarrer les
travaux.
Table multifonctions
Manual de instrucciones
IMPORTANTE: Lea y comprende todas
las instrucciones antes de usar.
Mesa funcional
466 552_001
(70267, 71119)
RTD10000395AA

Festool MFT 800 Specifications

General

Table dimensions	800 x 600 mm
Working height	900 mm
Max. workpiece width	800 mm
Material	MDF
Compatibility	Compatible with Festool guide rails and accessories

Summary

Scope Of Delivery

Table and Guide Rail System Components

Lists main table, support, guide rail, and clamp components.

Key Included Accessories

Details included items like angle unit, fence rail, and stops.

Technical Data

MFT 800 Specifications

Technical details for the MFT 800 model.

MFT 1080 Specifications

Technical details for the MFT 1080 model.

Intended Use

Setting Up and Assembly

Step 1: Setting Up the Table

Instructions for unfolding and setting up the table legs.

Step 2: Trim Splinter Guard

Guide on cutting the guide rail's splinter guard.

Step 3 & 4: Attach Guide Rail System

Instructions for setting up guide rail supports and attaching the rail.

Step 5, 6 & 7: Final Assembly and Calibration

Details fence rail attachment, angle calibration, and workpiece thickness adjustment.

Step 8: Adjusting Depth of Cut

Setting the correct cutting depth for safety.

Accessories

Flat Clamp and Clamping Element MFT-SP

Describes the MFT-SP clamping system.

Screw Clamp FSZ

Details the FSZ vertical screw clamp.

Length Stop MFT-LA

Explains the MFT-LA length stop for consistent cuts.

Sliding Stop AR-MFT

Describes the included sliding stop.

Warranty Information

Conditions of 1+2 Warranty

Details the terms of the extended warranty.

Festool Limited Warranty

Outlines the standard limited warranty coverage and exclusions.