Festool MFT 1080 User Manual

1
MFT 800
MFT 1080
Instruction manual
IMPORTANT: Read and understand all
instructions before using.
Multifunction table
Guide dutilisation
IMPORTANT: Lire et comprendre toutes
les instructions avant de démarrer les
travaux.
Table multifonctions
Manual de instrucciones
IMPORTANTE: Lea y comprende todas
las instrucciones antes de usar.
Mesa funcional
466 552_001
(70267, 71119)
RTD10000395AA

Festool MFT 1080 Specifications

General

Table dimensions	1080 x 780 mm
Working height	900 mm
Max Load	100 kg
Grid hole spacing	96 mm
Grid hole diameter	20 mm
Material	aluminum

Summary

Technical data

Intended use

Setting up and assembly

Step 1: Setting up

Setting up the multifunction table by extending and securing the legs.

Step 2: Trim splinter guard

Trimming the splinter guard of the guide rail with a plunge-cut saw.

Step 3: Set up the guide rail support

Setting up the guide rail support and hinged rail holding device on the table.

Step 4: Attach guide rail

Attaching the guide rail to the support and holding device.

Step 5: Attach fence rail

Attaching the fence rail to the angle unit and table.

Step 6: Calibrate angle

Calibrating the angle between the guide rail and fence rail using a square.

Step 7: Adjusting workpiece thickness

Adjusting the guide rail height for different workpiece thicknesses.

Step 8: Adjusting depth of cut

Setting the correct depth of cut for the saw to avoid damage.

Accessories

Flat clamp, clamping element MFT-SP

Clamping system with flat clamps and steadying devices for workpieces.

Screw clamp FSZ

Vertical clamping system to fix workpieces on the table surface.

Length stop MFT-LA

Stop for routing or sawing at a constant distance to the guide rail.

Sliding stop AR-MFT (1 included in delivery)

Sliding stops that can be positioned on the stop ruler.

Warranty

Conditions of 1+2 Warranty

Details of the free extended warranty (1 year + 2 years) for Festool power tools.

Festool Limited Warranty

Festool's limited warranty terms, exclusions, and limitations.