21
12 Selection of the tool head
Tool head Fitting Application Thumbwheel
Carbide grinding wheels
with “split-form” teeth,
set of 35 SZ-RG 150
Removal of plaster for facing, remains
of tile adhesive and synthetic resin
plaster
4 – 6
Carbide grinding wheels
with “fl at-form” teeth,
set of 35 FZ-RG 150
Remove of soft plaster, fresh concrete,
remains of concrete and protective
coatings
4 – 6
Diamond disc DIA-HARD
150
Removal of hard materials, e.g. con-
crete with a strength higher than C10,
hard screed
6
Diamond disc DIA-ABRA-
SIV 150
Removal of soft materials with higher
removal rates, e.g. fresh concrete, tile
adhesive, plaster for facing, sandstone
6
Diamond disc DIA UNI
150
Universal application, e.g. paints (on
concrete, plaster, wood), adhesives,
plaster for facing
5 – 6
Carbide disc HW-150/SC For elastic coatings, protective coat-
ings, latex-based and oil-based paints,
plaster and porous concrete
2 – 3
To Next Page
Loading...
