To Next PageTo Next Page
Need help?Do you have a question about the Festool AGC 18 and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Battery Type | Li-Ion |
| Spindle Thread | M14 |
| Disc Diameter | 125 mm |
| Motor Type | Brushless |
Indicates a general warning of potential danger.
Indicates a risk of electric shock.
Advises reading the manual and safety instructions.
Mandates the use of ear protection.
Mandates the use of protective gloves.
Mandates the use of a dust mask.
General safety rules and instructions for safe operation.
Safety precautions for maintaining a clean and safe work environment.
Guidelines for safe use of electrical power tools and preventing shock.
Personal protective equipment and safe operating practices.
Proper methods for using and maintaining power tools.
Safe handling and charging practices for battery packs.
Instructions for servicing and maintaining the power tool.
Specific safety guidelines for using the tool with abrasive accessories.
Detailed safety rules for grinding wheels and abrasive cutting operations.
Understanding and preventing kickback incidents during operation.
Additional safety precautions for abrasive cutting operations.
Safety advice for using wire brushes on the power tool.
Important safety advice for various operating conditions and scenarios.
Precautions for handling and using sanding tools safely.
Explains the tool's smooth start-up feature.
Details how to adjust and use the variable speed control.
Describes the electronic constant speed maintenance.
Explains how the tool protects against sudden speed reductions.
Details the feature preventing automatic restart after power loss.
Describes how the tool manages and indicates overheating.
Proper grip and posture for safe operation.
Instructions for turning the power tool on and off.
Procedure for attaching the battery pack to the tool.
Procedure for detaching the battery pack from the tool.
How to check the remaining battery charge.
Guidance on attaching the auxiliary handle for better control.
Step-by-step instructions for mounting sanding tools.
Instructions for installing wire brushes onto the tool.
How to adjust the guard for optimal protection and spark deflection.
Steps to detach the guard or cutting guard from the tool.
Procedure for attaching the guard or cutting guard to the tool.
Safe procedures for performing sanding operations with the tool.
Guidelines for performing abrasive cutting tasks safely.
Safety measures for using the tool with wire brushes.
Information on the Systainer system for tool storage and transport.
Safety precautions and instructions for disposing of battery packs.
