8
• rubbing down or removing excess lime paste
with sanding vlies
2 - 3
• interim paint sanding on stained surfaces
• cleaning natural wood window grooves with
sanding felt
1 - 2
• sanding stained edges
• sanding thermoplastic synthetics
Maintenance and care
Always remove the plug from the
mains supply socket before carrying out any work
on the machine!
The cooling air vents on the motor housing must
always be free of blockages and clean to ensure
air circulation.
Any maintenance or repair work requiring the mo-
tor housing to be opened may only be carried out
by an authorised service workshop.
Accessories, tools
For safety reasons, only use original
Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalog or on the Internet under www.
festoolusa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be interlocked
together. They also can be interlocked atop Festool
CT dust extractors.
To open the Systainer:
– Turn the T-loc [6.1] to the position
.
To lock the Systainer:
– Turn the T-loc [6.1] to the position
.
To connect two Systainers:
– Place one Systainer on the top of the other
(Fig.6A).
– Turn the T-loc [6.1] to the position
or
(Fig. 6 B).
open
lock
connect
connect
T-loc
6.1
A
B
6
To Next Page
Loading...
Need help?
General