Festool RTS 400 REQ User Manual

708326_001
Festool GmbH
Wertstraße 20
73240 Wendlingen
Germany
www.festoolusa.com
Instruction manual - Orbital sander
Page 6
IMPORTANT: Read all instructions before using.
Guide d’utilisation - Ponceuse vibrante
Page 17
IMPORTANT: Lire toutes les instructions avant de démarrer les travaux.
Manual de instrucciones - Lijadora orbital
Página 29
IMPORTANTE: Lea todas las instrucciones antes de usar.
Instruction manual
Guide d’utilisation
Manual de instrucciones
RTS 400 REQ
DTS 400 REQ

Festool RTS 400 REQ Specifications

General

Type of sander	Orbital sander
Dust extraction port	Yes
Power	250 W
Dust container type	Dust bag
Idle speed (max)	12000 RPM
Idle speed (min)	6000 RPM
Idle oscillation rate (max)	24000 OPM
Idle oscillation rate (min)	12000 OPM
Power source	AC

Weight and Dimensions

Weight	1200 g
Sanding plate size (WxD)	80 x 130 mm

Summary

About this manual

Symbols

General Safety Instructions

Work Area, Electrical & Personal Safety

Guidelines for safe work area, electrical connections, personal attire, and alertness.

Power Tool Operation and Care

Best practices for operating and maintaining the power tool to ensure safety.

Machine-Related Safety Instructions

Health Hazard by Dust

Warns about dust hazards and recommends protective measures for health.

Intended Use and Technical Data

Functional Description

Identifies and describes the main components and parts of the sander.

Commissioning and Settings

Sanding Pad and Accessories

Dust Extraction

Edge Protector and Machine Operation

Service and Maintenance

Cleaning Agents and Solvents

Warns about specific cleaning agents that can damage plastic parts.

Accessories and Environment