Festool RTS 400 REQ User Manual

6
Original operating manual
About this manual
Save these instructions
It is important for you to read and understand this manual. The information it contains relates to protecting
your safety and preventing problems . The symbols below are used to help you recognize this information.
About this manual................................ 6
Symbols................................................ 7
Safety instructions ............................... 8
General safety instructions.................. 8
Machine-related safety instructions.... 9
Health hazard by dust .......................... 9
Intended use......................................... 10
Technical data ...................................... 10
Functional description ......................... 10
Commissioning .................................... 11
Settings................................................ 11
Electronics........................................... 11
Changing sanding pad [3].................... 12
Attaching sanding accessories using Stick-
Fix [4] ................................................... 12
Dust extraction .................................... 13
Edge protector [6]................................ 14
Working with the machine................... 14
Service and maintenance .................... 15
Accessories.......................................... 16
Environment ........................................ 16
DANGER Description of imminent haz-
ard and failure to avoid hazard
will result in death.
WARNING Description of hazard and
possible resulting injures or
death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Statement including nature of
hazard and possible result.
HINT Indicates information, notes,
or tips for improving your suc-
cess using the tool.

Festool RTS 400 REQ Specifications

General

Type of sander	Orbital sander
Dust extraction port	Yes
Power	250 W
Dust container type	Dust bag
Idle speed (max)	12000 RPM
Idle speed (min)	6000 RPM
Idle oscillation rate (max)	24000 OPM
Idle oscillation rate (min)	12000 OPM
Power source	AC

Weight and Dimensions

Weight	1200 g
Sanding plate size (WxD)	80 x 130 mm