14
DTSC 400 Li, RTSC 400 Li
GB
– Do not open the battery pack or the charger!
–Prevent metal parts (e.g. metal chips) or fluids
from entering the charger!
–
Do not use power adapters or battery packs
form other manufacturers to operate the cord-
less power tool. Do not use any charger from
other manufacturers for charging the battery
pack.
The use of impermissible accessories may
result in electric shock and / or serious acci-
dents!
– Protect the battery pack from excessive heat > 50
°C or constant heat sources such as sunlight or
naked flames!
– Never use water to extinguish burning li-ion bat-
tery packs! Use sand or a fire blanket.
– Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
– Always pull the mains plug out of the socket
when the charger is not in use.
2.4 Emission levels
Typically, the noise levels that are determined in ac-
cordance with EN 62841 (see EC declaration of con-
formity) are as follows:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 62841 (see EU Declaration of Con-
formity):
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
The sanders are designed for sanding wood, plas-
tic, composites, paint/varnish, filler and similar
materials as directed. Metals and materials that
contain asbestos must not be processed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
4Technical data
5 Machine features
DTSC 400Li RTSC 400Li
Sound pressure level
L
PA
68 dB(A) 68 dB(A)
Noise level L
WA
79 dB(A) 79 dB(A)
Uncertainty K 3 dB 3 dB
CAUTION
When working with noise
Damage to hearing
Always use ear protection.
DTSC 400Li RTSC 400Li
Vibration emissions
value (triaxial) a
h
< 2.5 m/s
2
3 m/s
2
Uncertainty K 2 m/s
2
2 m/s
2
Cordless orbital sander DTSC 400Li RTSC 400Li
Voltage 18 - 20 V 18 - 20 V
No-load speed 6000 - 10000 rpm 6000 - 10000 rpm
Sanding stroke 2,0 mm 2,0 mm
Sanding pad 100 x 150 mm 80 x 130 mm
Weight (excl. battery pack, incl. sanding pad) 0,9 kg 0,9 kg
[1-1]
On/Off switch
[1-2]
Battery pack
[1-3]
Capacity display
[1-4]
Extractor connector
[1-5]
Speed control
[1-6]
Sanding pad
[1-7]
Edge protector
To Next Page
Loading...
Need help?
General