Charger TCL 6 SCA 8
Permitted charging temperature range -5 °C to +55 °C -5 °C to +55 °C
Temperature monitoring via NTC resistor via NTC resistor
Safety class
/II /II
3 Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Read the operating instructions and
safety instructions.
For internal use only
Fuse with current
Safety transformers
Safety class II
Do not dispose of it with domestic
waste.
4 Intended use
Chargers suitable
– for charging the Festool lithium-ion battery
packs: BP, BPS and BPC in the following
voltage and current classes:
10.8 V (3S1P) 1.3 Ah, 1.5 Ah
10.8 V (3S2P) 2.6 Ah, 3.0 Ah
14.4 V (4S1P) 1.3 Ah, 1.5 Ah
14.4 V (4S2P) 2.6 Ah, 3.0 Ah, 4.2 Ah, 5.2 Ah*
18.0 V (5S1P) 1.3 Ah, 1.5 Ah, 2.6 Ah, 3.1 Ah*
18.0 V (5S2P) 2.6 Ah, 3.0 Ah, 4.2 Ah, 5.2 Ah*,
6.2 Ah*
– For internal use only.
* Rapid charging battery packs
The user is liable for improper or non-in
tended use.
5 Parts of the machine
[1-1]
Charging station
[1-2]
Battery pack
[1-3]
Remaining charge time display (SCA 8
only)
[1-4]
Charge status display
[1-5]
Cable holder
[1-6]
Vents (SCA 8 only)
[2]
Wall mount for charger
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Operation
6.1 Commissioning
WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the machine’s name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
must be used.
Start charging
Before use, the cable must be completely
unwound from the recess [1-5].
► Insert the charger's mains plug in the sock
et.
► Push the battery pack [1-2] into the charg
ing station[1-1].
Wall mounting
See figure [2]
6.2 Meaning of the LEDs
After inserting the charger in the socket, all the
LEDs light up for approx. 1 s (SCA 8 only).
After this, the charge status display [1-4] on the
charger initially changes to the yellow LED
English
9
To Next Page
Loading...
