Fetch TV Mini - Disconnect and Reconnect Wi-Fi; Check Wi-Fi IP Settings; Connect via Ethernet Cable; Try a Reset of your Fetch Box

11
Disconnect and reconnect Wi-Fi
On your box, go to Menu > Manage > Settings > Network > Wi-Fi and select your Wi-Fi network. Choose
Disconnect then select your Wi-Fi network to connect again.
Check your Internet speed (Page 8)
Check Wi-Fi IP settings
On your box, go to Menu > Manage > Settings > Network > Wi-Fi and select your Wi-Fi network. Now select
the Advanced Wi-Fi option. For good performance the Signal Quality (RSSI) should be between -20dB and
-70dB. Anything lower than - 75dB means a very low signal quality, and Wi-Fi may not work reliably. The Noise
measurement should ideally be between -80dB and -100dB.
Connect your Fetch Box to modem via Ethernet cable
If you can, use an Ethernet cable to connect your Fetch box directly to your modem. Your box may restart and
do a system or software update (may take a few minutes).
Try a reset of your Fetch Box (Page 13)