Go to fetco.com for the latest versions of all information Page 2 P216 February 2023
Specifications and Requirements
FETCO CBS-2240 Brewers have unique construction only available for these models.
CBS-2240 20-75 psig, (138-517kPa) 1½ gpm/(5.7 lpm)
Optimal water hardness between 125-250 TDS (6-13 grain)
Important! Please use a water filter for all beverage equipment
Temperature, as set by factory:
200°F (93°C) inside water tank (at sea level)
Water inlet fitting: 3/8 inch male flare.
Brewer supplied with inlet valve adaptor for BSP to SAE
Electrical: See electrical configuration chart Pg 3.
3.8 L/1.0 gal brew
(approximate)
CBS-2241 4-10 brews per hour
CBS-2242 11-16 brews per hour
Output is controlled by heater power and water temperature
Total Brew Cycle: Factory setting: 6 minutes consisting of 4 min. brew time and 2.0 min. drip delay
Individual menu brew-process parameters are user controllable for:
Basic user controls for brew volume, brew time, units of measure, recipe name
Advanced user controls for pulse count, prewet percent and prewet delay, drip delay, programmable energy saving
See pages 4-5 for how to adjust controls for temperature, brew volume, units - and all other settings
Model Height Width Depth
Shipping Dimensions
35” x 17” x 22”
88.9 x 43.2 x 55.9 cm
35” x 23” x 25”
88.9 x 58.4 x 63.5 cm
Calibrated for 1.0 gal brew/3.75 L Brew Basket 13” X 5” Coffee Filter 13” X 5 or FETCO# F002
CBS-2241 Front CBS-2242 Front CBS-2431 1 & CBS-2242 Side Power cord plug
SKU NUMBER IDENTIFICATION KEY EXAMPLE: SKU E2241US-1X117-PM001
Product Line
Level Family Region ID Phase Voltage Range
Individual Heater
Wattage
Bypass
Power Cord
E=extractor
1 A = 100-120 1 1.5 P=plastic M=manual 1=Yes 1=Yes 0=Terminal Block
2 B = 200-240 2 1.7 M=metal A=automatic 0=No 0=No 1= NEMA 5-15P
CE = IEC 3 C = 380-415 3 2.3
N=None
2=NEMA 5-20P
X=120 or 240
Dual Voltage
5.0
7= AUSTRALIAN
AS3112 (YP-35)
NEMA 5-15P; 120 V
NEMA 5-20P; 120 V
NEMA 6-15P; 240 V
Configuration