To Next PageTo Next Page
Need help?Do you have a question about the Fetco CBS-2131XTS and is the answer not in the manual?
FETCO® / Food Equipment Technologies Company contact information and address.
Phone, Fax, Email, and Technical Support contact information.
Key variables programmed for each batch size.
How software calculates water for prewetting and brewing.
Factory set defaults for volume, time, temp, and filter.
Touchscreen, spray dome, adjustable brew mechanism, bypass.
SD card use, programmable sizes, customizable screens, and electrical connection.
Identification of brewer components and ports.
Steps to access batch selection and programming menus.
Initial steps for installing and preparing the brewer.
Step-by-step guide for brewing a single 3-liter coffee batch.
Visual guide to brewing screens and status updates.
Explanation of 'ON', 'AUTO', and 'OFF' brew at temperature settings.
Functionality and importance of the brew basket sensor.
Procedure for entering and navigating programming menus.
Overview of programming categories and available settings.
Detailed settings for batch 1 and 2, including volume, time, and pulses.
How to copy settings between different batch configurations.
Settings for tank temperature and brew at temperature modes.
Configuration for units, energy saving, and sensor settings.
Settings for display inputs and touch screen calibration.
Viewing output summary and performing valve calibration tests.
Configuration for heater and screen brightness/contrast.
Procedure to measure the water flow rate for calibration.
Steps for automatic and manual flow rate calibration.
Information on the hot water tap for single cup brewing.
List of error codes and procedures for clearing them.
Settings for copying programs, uploading logos, and factory resets.
Options for brewer configuration, counters, firmware, and demo mode.
Important operating procedures for users to follow.
Daily, weekly, and post-brew cleaning procedures.
Critical safety precautions during cleaning and operation.
Steps for final setup and initial batch testing.
Essential safety precautions for operation and installation.
Detailed list of error codes, causes, and corrective actions.
Table of dimensions, weights, and capacities for different models.
Diagrams showing brewer dimensions and connection points.
Details on water pressure, inlet fitting, volume, and temperature.
Electrical specs for single 3-liter airpot brewers by region.
Electrical specs for twin 3-liter airpot brewers by region.
Electrical configurations for 1-gallon single dispenser models.
Electrical configurations for 1-gallon twin dispenser models.
Grounding, voltage verification, and circuit breaker requirements.
Codes, filters, flow rates, and backflow prevention for water lines.
Use of qualified technicians and dispenser placement.
Important warnings regarding leveling and electrical safety.
Steps for setting up the brewer, including weight, leveling, and environmental conditions.
Detailed instructions for connecting the water supply line and filter.
Grounding, voltage compatibility, and local code compliance.
Specifics on hardwiring, cord/plug types, and service modules.
Diagram and list of parts for the spray housing assembly.
Diagram and list of parts for the standard and optional brewbaskets.
List of parts for the CBS-2132 XTS 3 liter no bypass assembly.
List of parts for the CBS-2132 XTS 1 gallon assembly.
List of parts for the CBS-2131XTS 3 liter assembly.
List of parts for the CBS-2131XTS 1 gallon assembly.
Parts diagram for international export model.
List of parts for the export CBS-2131, CE 3kW/240VAC, 3L assembly.
List of parts for the CE export assembly.
Parts diagram for the CBS-2132XTS tank assembly.
List of parts for the CBS-2132XTS tank assembly.
Parts diagram for the CBS-2131XTS tank assembly.
List of parts for the CBS-2131XTS tank assembly.
Parts diagram for the CBS-2132XTS back panel assembly.
List of parts for the CBS-2132XTS back panel assembly.
Parts diagram for the CBS-2131XTS back panel assembly.
List of parts for the CBS-2131XTS back panel assembly.
Parts diagram for CE certified CBS-2131/41 back panel.
List of parts for the CE certified CBS-2131/41 back panel.
Parts diagram for CE certified CBS-2132/42 back panel.
List of parts for the CE certified CBS-2132/42 back panel.
Diagram showing the path of cold water inlet to the tank.
Diagram showing water flow from tank to spray head and brew basket.
Diagram showing cold water inlet path for CBS-2132 XTS.
Diagram showing water flow for CBS-2132 XTS from tank to spray heads.
North American wiring diagram for CBS-2132 XTS.
Wiring details for the control board connections on CBS-2132 XTS.
Wiring for 1x3.0kW/240V heater configuration on CBS-2131 XTS.
Wiring for 2x3.0kW/240V heater configuration on CBS-2132 XTS.
Wiring diagram for CBS-2131 XTS, Japan configuration.
Wiring diagram for CBS-2131 XTS, USA configuration.
Wiring diagram for CBS-2132 XTS, North America configuration.
Wiring diagram for CBS-2131 XTS, USA configuration.
Wiring for multiple configurations of CBS-2131 XTS.
Wiring diagram for CBS-2131 XTS, Japan export configuration.
Wiring diagram for CBS-2131 XTS, Export configuration.
Wiring diagram for CBS_2132XTS, North America configuration.
General| Manufacturer | Fetco |
|---|---|
| Model | CBS-2131XTS |
| Category | Coffee Maker |
| Material | Stainless Steel |
| Electrical | 120V |
| Phase | Single Phase |
| Power | Electric |
| Temperature Control | Adjustable |
| Warranty | 1 Year Limited |
