To Next PageTo Next Page
Need help?Do you have a question about the Fetco CBS-2031e and is the answer not in the manual?
Explains programmed variables like brew volume, time, prewet, and drip delay for each batch.
Lists features like programmable batch sizes, adjustable prewetting, electronic hot water, and temp protection.
Specifies required water pressure and flow rate for CBS-2031 and CBS-2032 models.
Details empty and filled weights, water tank capacity for both models.
Lists electrical configurations, voltage, phase, wires, KW, amp draw, and batches per hour.
Details electrical configurations, voltage, phase, wires, KW, amp draw, and batches per hour.
Provides electrical specs for export models, including voltage and batches per hour.
Lists electrical specifications for export CBS-2032 models.
Shows front, side, and top views with dimensions for the CBS-2031 model.
Displays front, side, and top views with dimensions for the CBS-2032 model.
Highlights critical points for correct brewer operation and warranty.
Emphasizes NEUTRAL connection and compliance with local codes for electrical setup.
Stresses flushing water lines and verifying flow rate and pressure before connection.
Provides step-by-step guidance for brewer setup and water connection procedures.
Details factory configuration (120 VAC) and optional field conversion (120/208-240 VAC) wiring.
Shows the wiring for CBS-2032, which connects only to 120/208-240 VAC.
Guides through turning on water/power, checking for leaks, and initial brewing.
Outlines key procedures for new users, including preheating dispensers and handling condensation.
Explains the purpose and status of each control panel switch and the display.
Details the steps for preparing and starting a brew cycle, including basket and dispenser placement.
Describes how to set brew volume, time, prewet percentage, and drip delay for each batch.
Details the parameters like batch enable, brew volume, brew time, prewet, and drip delay.
Covers water temperature, hot water service, and brew-at-set-temperature options.
Explains settings for water level, resistance, relay state, and temperature/volume scales.
Outlines how to test individual relays controlling brewer components like valves and heaters.
Lists error codes, possible causes, corrective actions, and how to clear them.
Advises using qualified technicians and checking control board software versions.
Provides instructions for cleaning spray plates and general care for stainless steel surfaces.
Lists recommended cleaning agents for routine cleaning, fingerprints, stains, and grease.
Shows the electrical schematic for the CBS-2031, including component connections.
Presents the electrical schematic for the CBS-2032, detailing component wiring.
Lists key part numbers and descriptions for the CBS-2031 model.
Provides a detailed parts list with part numbers and descriptions for Figure 1 of CBS-2032.
Details parts for the spray housing assembly, including screws, coils, and spray plates.
Lists components for the brew basket assembly, including wire inserts, screws, and handles.
General| Category | Coffee Maker |
|---|---|
| Manufacturer | Fetco |
| Model | CBS-2031e |
| Power | 1500 watts |
| Voltage | 120V |
| Material | Stainless Steel |
| Control Type | Electronic |
| Warranty | 1 year |
