To Next PageTo Next Page
Need help?Do you have a question about the Fetco CBS-2031S and is the answer not in the manual?
Pre-heat dispensers before first use by filling half way with hot water for 15 minutes.
Do not remove the brew basket until it has stopped dripping.
Ensure dispenser is empty before brewing into it.
Demonstrate attaching covers and securing thermal dispensers for transport.
Show location and operation of water shut off valve and circuit breaker.
Explain that condensation drips from vent tubes into brew baskets.
Advise leaving brewer on overnight to maintain temperature and reduce start-up delays.
Details on the main power, control panel, display, stop, brew, and hot water switches.
Step-by-step instructions for preparing and executing a brew cycle.
Procedure for setting brew volume, time, prewetting, and delays for each batch.
Adjust water temperature, hot water service, and brew-at-temperature modes.
Access diagnostic tests, calibration, and system settings.
Lists error codes, possible causes, and corrective actions for system issues.
Details on resolving errors like initial fill, refill, temperature, and keypad issues.
Diagram and itemized list of components for the main assembly.
Diagram and itemized list of components for the tank assembly.
Diagram and itemized list of components for the main assembly.
Diagram and itemized list of components for the tank assembly.
Diagram and itemized list of components for round and square brew baskets.
General| Brand | Fetco |
|---|---|
| Model | CBS-2031S |
| Category | Coffee Maker |
| Language | English |
