www.team−hosta.de
22
Transport equipment
Lowering
In order to lower the lifting table cart, move the lever at the push handle down-
wards until the required table position is reached.
The lowering speed depends on the actuation level.
Secured parking / transport of the lifting table cart
Always park the lifting table cart after use with lowered table in order to secure
it against rolling away.
The lifting table cart may never be parked on ground with any gradient.
When transporting the lifting table cart on a truck, trailer or any other vehic-
le, the lifting table cart must be properly secured with suitable load tie-down
equipment.
Risks during usage – remaining risks
• There is a risk of injury at crushing and shearing points of the lifting table
cart. Therefore, when operating the lifting table cart, the operator should
always keep both hands at the push handle and always position his feet
outside the lifting table cart’s working range.
• Furthermore, there is a risk that during operation of the lifting table cart
third persons may be injured by carelessness of the operator.
The operator in his responsibility as machine operator must make sure
that no other persons are present in the lifting table cart’s working range
and that he can never lose control of the lifting table cart’s operation.
• Regardless of the lifting table cart’s capacity, the load to be transported
must be limited by the operator in such a way that it can be moved
safely and without any risk by the physical force of the operating person.
If overloaded, there is a risk that the operator may lose control of the
lifting table cart.
www.team−hosta.de
To Next Page
Loading...